CIM15.IEC61968.PaymentMetering.AccountingUnit'.AccountingUnit:
Unit for accounting; use either 'energyUnit' or 'currencyUnit' to
specify the unit for 'value'.Unit for accounting; use either
'energyUnit' or 'currencyUnit' to specify the unit for 'value'.
CIM14.ENTSOE.Equipment.Core.CurveData'.CurveData:
Multi-purpose data points for defining a curve.- The CurveData
class is used to represent points for various curves that derive
from the Curve class.
CIM14.ENTSOE.Equipment.IEC61970CIMVersion'.IEC61970CIMVersion:
This is the IEC 61970 CIM version number assigned to this UML model
file.- The two IEC61970CIMVersion attributes should be assigned
the values defined as the initial values in the CIM UML.
CIM14.ENTSOE.Equipment.Core.BaseVoltage'.BaseVoltage:
Defines a nominal base voltage which is referenced in the
system.For the 2010 ENTSOE IOP, the BaseVoltage association for
SeriesCompensator and TransformerWinding is required.
CIM14.ENTSOE.Equipment.Core.Curve'.Curve:
A multi-purpose curve or functional relationship between an
independent variable (X-axis) and dependent (Y-axis) variables.
CIM14.ENTSOE.Equipment.Core.PowerSystemResource'.PowerSystemResource:
A power system resource can be an item of equipment such as a
Switch, an EquipmentContainer containing many individual items of
equipment such as a Substation, or an organisational entity such
as Company or SubControlArea.
CIM14.ENTSOE.Equipment.Core.Substation'.Substation:
A collection of equipment for purposes other than generation or
utilization, through which electric energy in bulk is passed for
the purposes of switching or modifying its characteristics.
CIM14.ENTSOE.Equipment.ControlArea.ControlArea'.ControlArea:
A <b>control area </b>is a grouping of
<b>generating units</b> and/or loads and a cutset of
tie lines (as <b>terminals</b>) which may be used for a
variety of purposes including automatic generation control,
powerflow solution area interchange control specification, and
input to load forecasting.
CIM14.CDPSM.Unbalanced.IEC61970.Core.Bay'.Bay:
A collection of power system resources (within a given substation)
including conducting equipment, protection relays, measurements,
and telemetry.
CIM14.CDPSM.Unbalanced.IEC61970.Core.Substation'.Substation:
A collection of equipment for purposes other than generation or
utilization, through which electric energy in bulk is passed for
the purposes of switching or modifying its characteristics.
CIM14.CDPSM.Unbalanced.IEC61970.Wires.Conductor'.Conductor:
Combination of conducting material with consistent electrical
characteristics, building a single electrical system, used to carry
current between points in the power system.
CIM14.CDPSM.Unbalanced.IEC61970.Wires.ACLineSegment'.ACLineSegment:
A wire or combination of wires, with consistent electrical
characteristics, building a single electrical system, used to carry
alternating current between points in the power system.If the
instance is an ACLineSegment, the r, x, r0 and x0 attibutes are
mandatory.
CIM14.CDPSM.Unbalanced.IEC61970.Wires.Breaker'.Breaker:
A mechanical switching device capable of making, carrying, and
breaking currents under normal circuit conditions and also making,
carrying for a specified time, and breaking currents under
specified abnormal circuit conditions e.g.
CIM15.CDPSM.Connectivity.IEC61970.Core.Bay'.Bay:
A collection of power system resources (within a given substation)
including conducting equipment, protection relays, measurements,
and telemetry.
CIM15.CDPSM.Connectivity.IEC61970.Core.Substation'.Substation:
A collection of equipment for purposes other than generation or
utilization, through which electric energy in bulk is passed for
the purposes of switching or modifying its characteristics.
CIM15.CDPSM.Connectivity.IEC61970.Wires.Breaker'.Breaker:
A mechanical switching device capable of making, carrying, and
breaking currents under normal circuit conditions and also making,
carrying for a specified time, and breaking currents under
specified abnormal circuit conditions e.g.
CIM15.CDPSM.Geographical.IEC61970.Wires.Breaker'.Breaker:
A mechanical switching device capable of making, carrying, and
breaking currents under normal circuit conditions and also making,
carrying for a specified time, and breaking currents under
specified abnormal circuit conditions e.g.
CIM14.CDPSM.Balanced.IEC61970.Core.Bay'.Bay:
A collection of power system resources (within a given substation)
including conducting equipment, protection relays, measurements,
and telemetry.
CIM14.CDPSM.Balanced.IEC61970.Core.Substation'.Substation:
A collection of equipment for purposes other than generation or
utilization, through which electric energy in bulk is passed for
the purposes of switching or modifying its characteristics.
CIM14.CDPSM.Balanced.IEC61970.Wires.Conductor'.Conductor:
Combination of conducting material with consistent electrical
characteristics, building a single electrical system, used to carry
current between points in the power system.
CIM14.CDPSM.Balanced.IEC61970.Wires.ACLineSegment'.ACLineSegment:
A wire or combination of wires, with consistent electrical
characteristics, building a single electrical system, used to carry
alternating current between points in the power system.If the
instance is an ACLineSegment, the resistance and reactance is
mandatory.
CIM14.CDPSM.Balanced.IEC61970.Wires.Breaker'.Breaker:
A mechanical switching device capable of making, carrying, and
breaking currents under normal circuit conditions and also making,
carrying for a specified time, and breaking currents under
specified abnormal circuit conditions e.g.
CIM14.CDPSM.Balanced.IEC61970.Wires.Fuse'.Fuse:
An overcurrent protective device with a circuit opening fusible
part that is heated and severed by the passage of overcurrent
through it.
CIM14.ENTSOE.Topology.Topology.TopologicalNode'.TopologicalNode:
For a detailed substation model a TopologicalNode is a set of
connectivity nodes that, in the current network state, are
connected together through any type of closed switches, including
jumpers.
CIM14.CPSM.Equipment.Core.CurveData'.CurveData:
Multi-purpose data points for defining a curve.- The CurveData
class is used to represent points for various curves that derive
from the Curve class.
CIM14.CPSM.Equipment.IEC61970CIMVersion'.IEC61970CIMVersion:
This is the IEC 61970 CIM version number assigned to this UML model
file.- The two IEC61970CIMVersion attributes should be assigned
the values defined as the initial values in the CIM UML.
CIM14.CPSM.Equipment.Core.Curve'.Curve:
A multi-purpose curve or functional relationship between an
independent variable (X-axis) and dependent (Y-axis) variables.
CIM14.CPSM.Equipment.Meas.Analog'.Analog:
Analog represents an analog Measurement.- The positiveFlowIn
attribute is only required if the Measurement measures a
directional flow of power.
CIM14.CPSM.Equipment.Core.PowerSystemResource'.PowerSystemResource:
A power system resource can be an item of equipment such as a
Switch, an EquipmentContainer containing many individual items of
equipment such as a Substation, or an organisational entity such
as Company or SubControlArea.
CIM14.CPSM.Equipment.Core.Bay'.Bay:
A collection of power system resources (within a given substation)
including conducting equipment, protection relays, measurements,
and telemetry.- The Bay class is used as a container for Switches.
CIM14.CPSM.Equipment.Core.Substation'.Substation:
A collection of equipment for purposes other than generation or
utilization, through which electric energy in bulk is passed for
the purposes of switching or modifying its characteristics.
CIM14.CPSM.Equipment.ControlArea.ControlArea'.ControlArea:
A <b>control area </b>is a grouping of
<b>generating units</b> and/or loads and a cutset of
tie lines (as <b>terminals</b>) which may be used for a
variety of purposes including automatic generation control,
powerflow solution area interchange control specification, and
input to load forecasting.
CIM14.CPSM.Equipment.Core.RegularTimePoint'.RegularTimePoint:
TimePoints for a schedule where the time between the points is
constant.- The RegularTimePoint class is used to represent points
for various schedules that derive from the RegularIntervalSchedule
class.
CIM15.IEC61970.ControlArea.AltTieMeas'.AltTieMeas:
A prioritized measurement to be used for the tie flow as part of
the control area specification.A prioritized measurement to be used
for the tie flow as part of the control area specification.
CIM15.IEC61968.PaymentMetering.Card'.Card:
Documentation of the tender when it is a type of card (credit,
debit, etc).Documentation of the tender when it is a type of card
(credit, debit, etc).
CIM15.IEC61970.Graphics.DiagramObjectGluePoint'.DiagramObjectGluePoint:
This is used for grouping DiagramObjectPoints from different
DiagramObjects that are considered to be
‘glued’ together in a diagram even if they are
not at the exact same coordinates.This is used for grouping
DiagramObjectPoints from different DiagramObjects that are
considered to be ‘glued’ together in a diagram
even if they are not at the exact same coordinates.
CIM15.IEC61970.Core.IdentifiedObject'.IdentifiedObject:
This is a root class to provide common identification for all
classes needing identification and naming attributesThis is a root
class to provide common identification for all classes needing
identification and naming attributes
CIM15.IEC61968.Common.ActivityRecord'.ActivityRecord:
Records activity for an entity at a point in time; activity may be
for an event that has already occurred or for a planned
activity.Records activity for an entity at a point in time;
activity may be for an event that has already occurred or for a
planned activity.
CIM15.IEC61970.Informative.InfWork.WorkStatusEntry'.WorkStatusEntry:
A type of ActivityRecord that records information about the status
of an item, such as a Work or WorkTask, at a point in time.A type
of ActivityRecord that records information about the status of an
item, such as a Work or WorkTask, at a point in time.
CIM15.IEC61968.Assets.AssetContainer'.AssetContainer:
Asset that is aggregation of other assets such as conductors,
transformers, switchgear, land, fences, buildings, equipment,
vehicles, etc.Asset that is aggregation of other assets such as
conductors, transformers, switchgear, land, fences, buildings,
equipment, vehicles, etc.
CIM15.IEC61970.Informative.InfAssets.Cabinet'.Cabinet:
Enclosure that offers protection to the equipment it contains
and/or safety to people/animals outside it.Enclosure that offers
protection to the equipment it contains and/or safety to
people/animals outside it.
CIM15.IEC61970.Informative.InfAssets.ComEquipment'.ComEquipment:
Communicaiton equipment assets other than media (such as gateways,
routers, controllers, etc.).Communicaiton equipment assets other
than media (such as gateways, routers, controllers, etc.).
CIM15.IEC61968.Assets.ComMedia'.ComMedia:
Communication media such as fibre optic cable, power-line,
telephone, etc.Communication media such as fibre optic cable,
power-line, telephone, etc.
CIM15.IEC61970.Informative.InfAssets.SVC'.SVC:
SVC asset allows the capacitive and inductive ratings for each
phase to be specified individually if required.SVC asset allows the
capacitive and inductive ratings for each phase to be specified
individually if required.
CIM15.IEC61968.Metering.EndDeviceFunction'.EndDeviceFunction:
Function performed by an end device such as a meter, communication
equipment, controllers, etc.Function performed by an end device
such as a meter, communication equipment, controllers, etc.
CIM15.IEC61968.Metering.ComFunction'.ComFunction:
Communication function of communication equipment or a device such
as a meter.Communication function of communication equipment or a
device such as a meter.
CIM15.IEC61968.Metering.SimpleEndDeviceFunction'.SimpleEndDeviceFunction:
Simple end device function distinguished by 'kind'; use this class
for instances that cannot be represented by another end device
function subtype.Simple end device function distinguished by
'kind'; use this class for instances that cannot be represented by
another end device function subtype.
CIM15.IEC61968.Assets.AssetInfo'.AssetInfo:
Set of attributes of an asset, representing typical data-sheet
information of a physical device, that can be instantiated and
shared in different data exchange contexts: - as attributes of an
asset instance (installed or in stock) - as attributes of an asset
model (product by a manufacturer) - as attributes of a type asset
(generic type of an asset as used in designs/extension
planning).Set of attributes of an asset, representing typical
data-sheet information of a physical device, that can be
instantiated and shared in different data exchange contexts: - as
attributes of an asset instance (installed or in stock) - as
attributes of an asset model (product by a manufacturer) - as
attributes of a type asset (generic type of an asset as used in
designs/extension planning).
CIM15.IEC61970.Core.BasePower'.BasePower:
The BasePower class defines the base power used in the per unit
calculations.The BasePower class defines the base power used in the
per unit calculations.
CIM15.IEC61970.Core.BaseVoltage'.BaseVoltage:
Defines a nominal base voltage which is referenced in the
system.Defines a nominal base voltage which is referenced in the
system.
CIM15.IEC61970.Outage.OutageSchedule'.OutageSchedule:
The period of time that a piece of equipment is out of service, for
example, for maintenance or testing; including the equipment's
active power rating while under maintenance.
CIM15.IEC61970.Generation.Production.HydroPumpOpSchedule'.HydroPumpOpSchedule:
The hydro pump's Operator-approved current operating schedule (or
plan), typically produced with the aid of unit commitment type
analyses.The unit's operating schedule status is typically given
as: (0=unavailable) (1=avilable to startup or shutdown) (2=must
pump)The hydro pump's Operator-approved current operating schedule
(or plan), typically produced with the aid of unit commitment type
analyses.The unit's operating schedule status is typically given
as: (0=unavailable) (1=avilable to startup or shutdown) (2=must
pump)
CIM15.IEC61970.LoadModel.NonConformLoadSchedule'.NonConformLoadSchedule:
An active power (Y1-axis) and reactive power (Y2-axis) schedule
(curves) versus time (X-axis) for non-conforming loads, e.g., large
industrial load or power station service (where modeled)An active
power (Y1-axis) and reactive power (Y2-axis) schedule (curves)
versus time (X-axis) for non-conforming loads, e.g., large
industrial load or power station service (where modeled)
CIM15.IEC61970.Informative.InfWork.CUAsset'.CUAsset:
Compatible unit for various types of assets such as transformers
switches, substation fences, poles, etc..Compatible unit for
various types of assets such as transformers switches, substation
fences, poles, etc..
CIM15.IEC61970.Informative.InfWork.CUGroup'.CUGroup:
A Compatible Unit Group identifies a set of compatible units which
may be jointly utilized for estimating and designating jobs.A
Compatible Unit Group identifies a set of compatible units which
may be jointly utilized for estimating and designating jobs.
CIM15.IEC61970.Informative.InfOperations.CallBack'.CallBack:
Information about a planned CallBack or a CallBack that has
occurred, from the utility to a customer regarding the status and
plans about resolving trouble, performing work, etc.Information
about a planned CallBack or a CallBack that has occurred, from the
utility to a customer regarding the status and plans about
resolving trouble, performing work, etc.
CIM15.IEC61970.Informative.InfWork.ConditionFactor'.ConditionFactor:
This is to specify the various condition factors for a design that
may alter the cost estimate or the allocation.This is to specify
the various condition factors for a design that may alter the cost
estimate or the allocation.
CIM15.IEC61970.Core.ConnectivityNode'.ConnectivityNode:
Connectivity nodes are points where terminals of conducting
equipment are connected together with zero impedance.Connectivity
nodes are points where terminals of conducting equipment are
connected together with zero impedance.
CIM15.IEC61970.Contingency.Contingency'.Contingency:
An event threatening system reliability, consisting of one or more
contingency elements.An event threatening system reliability,
consisting of one or more contingency elements.
CIM15.IEC61970.Contingency.ContingencyElement'.ContingencyElement:
An element of a system event to be studied by contingency analysis,
representing a change in status of a single piece of equipment.An
element of a system event to be studied by contingency analysis,
representing a change in status of a single piece of equipment.
CIM15.IEC61970.Contingency.ContingencyEquipment'.ContingencyEquipment:
A equipment to which the in service status is to change such as a
power transformer or AC line segment.A equipment to which the in
service status is to change such as a power transformer or AC line
segment.
CIM15.IEC61970.Meas.Command'.Command:
A Command is a discrete control used for supervisory control.A
Command is a discrete control used for supervisory control.
CIM15.IEC61970.Meas.SetPoint'.SetPoint:
A SetPoint is an analog control used for supervisory control.A
SetPoint is an analog control used for supervisory control.
CIM15.IEC61970.Informative.InfWork.Crew'.Crew:
A crew is a group of people with specific skills, tools, and
vehicles.A crew is a group of people with specific skills, tools,
and vehicles.
CIM15.IEC61970.Core.Curve'.Curve:
A multi-purpose curve or functional relationship between an
independent variable (X-axis) and dependent (Y-axis) variables.A
multi-purpose curve or functional relationship between an
independent variable (X-axis) and dependent (Y-axis) variables.
CIM15.IEC61970.Generation.GenerationDynamics.CTTempActivePowerCurve'.CTTempActivePowerCurve:
Relationship between the combustion turbine's power output rating
in gross active power (X-axis) and the ambient air temperature
(Y-axis)Relationship between the combustion turbine's power output
rating in gross active power (X-axis) and the ambient air
temperature (Y-axis)
CIM15.IEC61970.Generation.Production.ShutdownCurve'.ShutdownCurve:
Relationship between the rate in gross active power/minute (Y-axis)
at which a unit should be shutdown and its present gross MW output
(X-axis)Relationship between the rate in gross active power/minute
(Y-axis) at which a unit should be shutdown and its present gross
MW output (X-axis)
CIM15.IEC61970.Generation.Production.StartIgnFuelCurve'.StartIgnFuelCurve:
The quantity of ignition fuel (Y-axis) used to restart and repay
the auxiliary power consumed versus the number of hours (X-axis)
the unit was off lineThe quantity of ignition fuel (Y-axis) used to
restart and repay the auxiliary power consumed versus the number of
hours (X-axis) the unit was off line
CIM15.IEC61970.Generation.Production.StartMainFuelCurve'.StartMainFuelCurve:
The quantity of main fuel (Y-axis) used to restart and repay the
auxiliary power consumed versus the number of hours (X-axis) the
unit was off lineThe quantity of main fuel (Y-axis) used to restart
and repay the auxiliary power consumed versus the number of hours
(X-axis) the unit was off line
CIM15.IEC61970.Generation.Production.StartRampCurve'.StartRampCurve:
Rate in gross active power/minute (Y-axis) at which a unit can be
loaded versus the number of hours (X-axis) the unit was off
lineRate in gross active power/minute (Y-axis) at which a unit can
be loaded versus the number of hours (X-axis) the unit was off line
CIM15.IEC61970.Informative.InfCustomers.SubscribePowerCurve'.SubscribePowerCurve:
Price curve for specifying the cost of energy (X) at points in time
(y1) according to a prcing structure, which is based on a
tariff.Price curve for specifying the cost of energy (X) at points
in time (y1) according to a prcing structure, which is based on a
tariff.
CIM15.IEC61970.LoadModel.DayType'.DayType:
Group of similar days, e.g., Mon/Tue/Wed, Thu/Fri, Sat/Sun,
Holiday1, Holiday2Group of similar days, e.g., Mon/Tue/Wed,
Thu/Fri, Sat/Sun, Holiday1, Holiday2
CIM15.IEC61968.PaymentMetering.AuxiliaryAccount'.AuxiliaryAccount:
Variable and dynamic part of auxiliary agreement, generally
representing the current state of the account related to the
outstanding balance defined in auxiliary agreement.Variable and
dynamic part of auxiliary agreement, generally representing the
current state of the account related to the outstanding balance
defined in auxiliary agreement.
CIM15.IEC61970.Informative.InfWork.BusinessCase'.BusinessCase:
Business justification for capital expenditures, usually addressing
operations and maintenance costs as well.Business justification for
capital expenditures, usually addressing operations and maintenance
costs as well.
CIM15.IEC61970.Informative.InfWork.CompatibleUnit'.CompatibleUnit:
A pre-planned job model containing labor, material, and accounting
requirements for standardized job planning.A pre-planned job model
containing labor, material, and accounting requirements for
standardized job planning.
CIM15.IEC61970.Informative.InfERPSupport.ErpPOLineItem'.ErpPOLineItem:
Of an ErpPurchaseOrder, this is an individually ordered item or
product along with the quantity, price and other descriptive
information.Of an ErpPurchaseOrder, this is an individually ordered
item or product along with the quantity, price and other
descriptive information.
CIM15.IEC61970.Informative.InfWork.NonStandardItem'.NonStandardItem:
This document provides information for non-standard items like
customer contributions (e.g., customer digs trench), vouchers
(e.g., credit), and contractor bids.This document provides
information for non-standard items like customer contributions
(e.g., customer digs trench), vouchers (e.g., credit), and
contractor bids.
CIM15.IEC61970.Informative.InfWork.OneCallRequest'.OneCallRequest:
A request for other utilities to mark their underground facilities
prior to commencement of construction and/or maintenance.A request
for other utilities to mark their underground facilities prior to
commencement of construction and/or maintenance.
CIM15.IEC61970.Informative.InfOperations.OutageRecord'.OutageRecord:
A document describing details of an outage in part of the
electrical network, typically produced by a SCADA system following
a breaker trip, or within a trouble call system by grouping
customer calls.
CIM15.IEC61970.Informative.InfWork.MaintenanceDataSet'.MaintenanceDataSet:
The result of a maintenance activity, a type of Procedure, for a
given attribute of an asset is documentated in an
MaintenanceDataSet.The result of a maintenance activity, a type of
Procedure, for a given attribute of an asset is documentated in an
MaintenanceDataSet.
CIM15.IEC61970.Informative.InfOperations.SafetyDocument'.SafetyDocument:
A document restricting or authorising works on electrical equipment
(for example a permit to work, sanction for test, limitation of
access, or certificate of isolation), defined based upon
organisational practices.
CIM15.IEC61970.Informative.InfCommon.Skill'.Skill:
Proficiency level of a craft, which is required to operate or
maintain a particular type of asset and/or perform certain types of
work.Proficiency level of a craft, which is required to operate or
maintain a particular type of asset and/or perform certain types of
work.
CIM15.IEC61968.Customers.Tariff'.Tariff:
Document, approved by the responsible regulatory agency, listing
the terms and conditions, including a schedule of prices, under
which utility services will be provided.
CIM15.IEC61968.PaymentMetering.TariffProfile'.TariffProfile:
A schedule of charges; structure associated with Tariff that allows
the definition of complex tarif structures such as step and time of
use when used in conjunction with TimeTariffInterval and Charge.
CIM15.IEC61970.LoadModel.LoadArea'.LoadArea:
The class is the root or first level in a hierarchical structure
for grouping of loads for the purpose of load flow load scaling.The
class is the root or first level in a hierarchical structure for
grouping of loads for the purpose of load flow load scaling.
CIM15.IEC61970.LoadModel.SubLoadArea'.SubLoadArea:
The class is the second level in a hierarchical structure for
grouping of loads for the purpose of load flow load scaling.The
class is the second level in a hierarchical structure for grouping
of loads for the purpose of load flow load scaling.
CIM15.IEC61970.Informative.InfERPSupport.ErpLedBudLineItem'.ErpLedBudLineItem:
Individual entry of a given Ledger Budget, typically containing
information such as amount, accounting date, accounting period, and
is associated with the applicable general ledger account.Individual
entry of a given Ledger Budget, typically containing information
such as amount, accounting date, accounting period, and is
associated with the applicable general ledger account.
CIM15.IEC61970.Informative.InfERPSupport.ErpPersonnel'.ErpPersonnel:
Information that applies to the basic data about a utility person,
used by ERP applications to transfer Personnel data for a
worker.Information that applies to the basic data about a utility
person, used by ERP applications to transfer Personnel data for a
worker.
CIM15.IEC61970.Informative.InfERPSupport.ErpRecLineItem'.ErpRecLineItem:
Individual entry of an ErpReceivable, it is a particular
transaction representing an invoice, credit memo or debit memo to a
customer.Individual entry of an ErpReceivable, it is a particular
transaction representing an invoice, credit memo or debit memo to a
customer.
CIM15.IEC61970.Generation.Production.FossilFuel'.FossilFuel:
The fossil fuel consumed by the non-nuclear thermal generating
units, e.g., coal, oil, gasThe fossil fuel consumed by the
non-nuclear thermal generating units, e.g., coal, oil, gas
CIM15.IEC61970.Informative.InfGMLSupport.GmlDiagramObject'.GmlDiagramObject:
Any of the magnitudes that serve to define the position of a point
by reference to a fixed figure, system of lines, etc.Any of the
magnitudes that serve to define the position of a point by
reference to a fixed figure, system of lines, etc.
CIM15.IEC61970.Informative.InfGMLSupport.GmlFeatureStyle'.GmlFeatureStyle:
Used for styling a particular aspect or aspects of a feature, such
as geometry, topology or arbitrary text string.Used for styling a
particular aspect or aspects of a feature, such as geometry,
topology or arbitrary text string.
CIM15.IEC61970.Informative.InfGMLSupport.GmlPolygonSymbol'.GmlPolygonSymbol:
Used to draw a polygon (or other area-type geometries), including
filling its interior and stroking its border (outline).Used to draw
a polygon (or other area-type geometries), including filling its
interior and stroking its border (outline).
CIM15.IEC61970.Meas.AccumulatorLimitSet'.AccumulatorLimitSet:
An AccumulatorLimitSet specifies a set of Limits that are
associated with an Accumulator measurement.An AccumulatorLimitSet
specifies a set of Limits that are associated with an Accumulator
measurement.
CIM15.IEC61970.Meas.AnalogLimitSet'.AnalogLimitSet:
An AnalogLimitSet specifies a set of Limits that are associated
with an Analog measurement.An AnalogLimitSet specifies a set of
Limits that are associated with an Analog measurement.
CIM15.IEC61970.LoadModel.LoadGroup'.LoadGroup:
The class is the third level in a hierarchical structure for
grouping of loads for the purpose of load flow load scaling.The
class is the third level in a hierarchical structure for grouping
of loads for the purpose of load flow load scaling.
CIM15.IEC61968.Common.Location'.Location:
The place, scene, or point of something where someone or something
has been, is, and/or will be at a given moment in time.
CIM15.IEC61970.Informative.InfWork.WorkLocation'.WorkLocation:
Information about a particular location for various forms of work
such as a one call request.Information about a particular location
for various forms of work such as a one call request.
CIM15.IEC61970.Informative.InfAssets.Medium'.Medium:
A substance that either (1) provides the means of transmission of a
force or effect, such as hydraulic fluid, or (2) is used for a
surrounding or enveloping substance, such as oil in a transformer
or circuit breaker.A substance that either (1) provides the means
of transmission of a force or effect, such as hydraulic fluid, or
(2) is used for a surrounding or enveloping substance, such as oil
in a transformer or circuit breaker.
CIM15.IEC61970.Informative.InfCore.ModelingAuthority'.ModelingAuthority:
A Modeling Authority is an entity responsible for supplying and
maintaining the data defining a specific set of objects in a
network model.A Modeling Authority is an entity responsible for
supplying and maintaining the data defining a specific set of
objects in a network model.
CIM15.IEC61970.Informative.InfOperations.NetworkDataSet'.NetworkDataSet:
Categorized as a type of document, model of a portion of the
electrical network that includes a list of the equipment, along
with relevant connectivity, electrical characteristics,
geographical location, and various parameters associated with the
equipment.Categorized as a type of document, model of a portion of
the electrical network that includes a list of the equipment, along
with relevant connectivity, electrical characteristics,
geographical location, and various parameters associated with the
equipment.
CIM15.IEC61968.Common.Organisation'.Organisation:
Organisation that might have roles as utility, contractor,
supplier, manufacturer, customer, etc.Organisation that might have
roles as utility, contractor, supplier, manufacturer, customer,
etc.
CIM15.IEC61970.Informative.InfCommon.Bank'.Bank:
Organisation that is a commercial bank, agency, or other
institution that offers a similar service.Organisation that is a
commercial bank, agency, or other institution that offers a similar
service.
CIM15.IEC61968.PaymentMetering.PointOfSale'.PointOfSale:
Logical point where transactions take place with operational
interaction between cashier and the payment system; in certain
cases point of sale interacts directly with the end customer, in
which case cashier might not be a real person: for example a
self-service kiosk or over the internet.Logical point where
transactions take place with operational interaction between
cashier and the payment system; in certain cases point of sale
interacts directly with the end customer, in which case cashier
might not be a real person: for example a self-service kiosk or
over the internet.
CIM15.IEC61970.Core.PowerSystemResource'.PowerSystemResource:
A power system resource can be an item of equipment such as a
Switch, an EquipmentContainer containing many individual items of
equipment such as a Substation, or an organisational entity such
as Company or SubControlArea.
CIM15.IEC61970.Generation.Production.AirCompressor'.AirCompressor:
Combustion turbine air compressor which is an integral part of a
compressed air energy storage (CAES) plantCombustion turbine air
compressor which is an integral part of a compressed air energy
storage (CAES) plant
CIM15.IEC61970.Generation.Production.CombinedCyclePlant'.CombinedCyclePlant:
A set of combustion turbines and steam turbines where the exhaust
heat from the combustion turbines is recovered to make steam for
the steam turbines, resulting in greater overall plant efficiencyA
set of combustion turbines and steam turbines where the exhaust
heat from the combustion turbines is recovered to make steam for
the steam turbines, resulting in greater overall plant efficiency
CIM15.IEC61970.Core.Bay'.Bay:
A collection of power system resources (within a given substation)
including conducting equipment, protection relays, measurements,
and telemetry.A collection of power system resources (within a
given substation) including conducting equipment, protection
relays, measurements, and telemetry.
CIM15.IEC61970.Informative.InfOperations.Circuit'.Circuit:
EquipmentContainer that will typically include conductors, energy
consumers, transformers and transformer windings, switches, shunt
compensators, etc., likely at different voltages.
CIM15.IEC61970.Wires.Line'.Line:
Contains equipment beyond a substation belonging to a power
transmission line.Contains equipment beyond a substation belonging
to a power transmission line.
CIM15.IEC61970.Wires.Plant'.Plant:
A Plant is a collection of equipment for purposes of generation.A
Plant is a collection of equipment for purposes of generation.
CIM15.IEC61970.Core.Substation'.Substation:
A collection of equipment for purposes other than generation or
utilization, through which electric energy in bulk is passed for
the purposes of switching or modifying its characteristics.A
collection of equipment for purposes other than generation or
utilization, through which electric energy in bulk is passed for
the purposes of switching or modifying its characteristics.
CIM15.IEC61970.ControlArea.ControlArea'.ControlArea:
A <b>control area </b>is a grouping of
<b>generating units</b> and/or loads and a cutset of
tie lines (as <b>terminals</b>) which may be used for a
variety of purposes including automatic generation control,
powerflow solution area interchange control specification, and
input to load forecasting.
CIM15.IEC61970.Core.Equipment'.Equipment:
The parts of a power system that are physical devices, electronic
or mechanicalThe parts of a power system that are physical devices,
electronic or mechanical
CIM15.IEC61970.AuxiliaryEquipment.Sensor'.Sensor:
This class describe devices that transform a measured quantity into
signals that can be presented at displays, used in control or be
recorded.This class describe devices that transform a measured
quantity into signals that can be presented at displays, used in
control or be recorded.
CIM15.IEC61970.AuxiliaryEquipment.SurgeProtector'.SurgeProtector:
Shunt device, installed on the network, usually in the proximity of
electrical equipment in order to protect the said equipment against
transient voltage spikes caused by lightning or switching
activity.Shunt device, installed on the network, usually in the
proximity of electrical equipment in order to protect the said
equipment against transient voltage spikes caused by lightning or
switching activity.
CIM15.IEC61970.Wires.CompositeSwitch'.CompositeSwitch:
A model of a set of individual Switches normally enclosed within
the same cabinet and possibly with interlocks that restrict the
combination of switch positions.
CIM15.IEC61970.Wires.Conductor'.Conductor:
Combination of conducting material with consistent electrical
characteristics, building a single electrical system, used to carry
current between points in the power system.Combination of
conducting material with consistent electrical characteristics,
building a single electrical system, used to carry current between
points in the power system.
CIM15.IEC61970.Wires.ACLineSegment'.ACLineSegment:
A wire or combination of wires, with consistent electrical
characteristics, building a single electrical system, used to carry
alternating current between points in the power system.
CIM15.IEC61970.Wires.DCLineSegment'.DCLineSegment:
A wire or combination of wires not insulated from one another, with
consistent electrical characteristics, used to carry direct current
between points in the DC region of the power system.A wire or
combination of wires not insulated from one another, with
consistent electrical characteristics, used to carry direct current
between points in the DC region of the power system.
CIM15.IEC61970.Wires.Connector'.Connector:
A conductor, or group of conductors, with negligible impedance,
that serve to connect other conducting equipment within a single
substation and are modelled with a single logical terminal.A
conductor, or group of conductors, with negligible impedance, that
serve to connect other conducting equipment within a single
substation and are modelled with a single logical terminal.
CIM15.IEC61970.Wires.Junction'.Junction:
A point where one or more conducting equipments are connected with
zero resistance.A point where one or more conducting equipments are
connected with zero resistance.
CIM15.IEC61970.LoadModel.ConformLoad'.ConformLoad:
ConformLoad represent loads that follow a daily load change pattern
where the pattern can be used to scale the load with a system
load.ConformLoad represent loads that follow a daily load change
pattern where the pattern can be used to scale the load with a
system load.
CIM15.IEC61970.LoadModel.NonConformLoad'.NonConformLoad:
NonConformLoad represent loads that do not follow a daily load
change pattern and changes are not correlated with the daily load
change pattern.NonConformLoad represent loads that do not follow a
daily load change pattern and changes are not correlated with the
daily load change pattern.
CIM15.IEC61970.Wires.EnergySource'.EnergySource:
A generic equivalent for an energy supplier on a transmission or
distribution voltage level.A generic equivalent for an energy
supplier on a transmission or distribution voltage level.
CIM15.IEC61970.Wires.RectifierInverter'.RectifierInverter:
Bi-directional AC-DC conversion equipment that can be used to
control DC current, DC voltage, DC power flow, or firing
angle.Bi-directional AC-DC conversion equipment that can be used to
control DC current, DC voltage, DC power flow, or firing angle.
CIM15.IEC61970.Wires.Switch'.Switch:
A generic device designed to close, or open, or both, one or more
electric circuits.A generic device designed to close, or open, or
both, one or more electric circuits.
CIM15.IEC61970.Wires.Disconnector'.Disconnector:
A manually operated or motor operated mechanical switching device
used for changing the connections in a circuit, or for isolating a
circuit or equipment from a source of power.
CIM15.IEC61970.Wires.Fuse'.Fuse:
An overcurrent protective device with a circuit opening fusible
part that is heated and severed by the passage of overcurrent
through it.
CIM15.IEC61970.Wires.GroundDisconnector'.GroundDisconnector:
A manually operated or motor operated mechanical switching device
used for isolating a circuit or equipment from Ground.A manually
operated or motor operated mechanical switching device used for
isolating a circuit or equipment from Ground.
CIM15.IEC61970.Wires.Jumper'.Jumper:
A short section of conductor with negligible impedance which can be
manually removed and replaced if the circuit is de-energized.
CIM15.IEC61970.Wires.ProtectedSwitch'.ProtectedSwitch:
A ProtectedSwitch is a switching device that can be operated by
ProtectionEquipment.A ProtectedSwitch is a switching device that
can be operated by ProtectionEquipment.
CIM15.IEC61970.Wires.Breaker'.Breaker:
A mechanical switching device capable of making, carrying, and
breaking currents under normal circuit conditions and also making,
carrying for a specified time, and breaking currents under
specified abnormal circuit conditions e.g.
CIM15.IEC61970.Wires.LoadBreakSwitch'.LoadBreakSwitch:
A mechanical switching device capable of making, carrying, and
breaking currents under normal operating conditions.A mechanical
switching device capable of making, carrying, and breaking currents
under normal operating conditions.
CIM15.IEC61970.Wires.Recloser'.Recloser:
Pole-mounted fault interrupter with built-in phase and ground
relays, current transformer (CT), and supplemental
controls.Pole-mounted fault interrupter with built-in phase and
ground relays, current transformer (CT), and supplemental controls.
CIM15.IEC61970.Protection.ProtectionEquipment'.ProtectionEquipment:
An electrical device designed to respond to input conditions in a
prescribed manner and after specified conditions are met to cause
contact operation or similar abrupt change in associated electric
control circuits, or simply to display the detected condition.
CIM15.IEC61970.Protection.CurrentRelay'.CurrentRelay:
A device that checks current flow values in any direction or
designated directionA device that checks current flow values in any
direction or designated direction
CIM15.IEC61970.LoadModel.PowerCutZone'.PowerCutZone:
An area or zone of the power system which is used for load shedding
purposes.An area or zone of the power system which is used for load
shedding purposes.
CIM15.IEC61970.Wires.RegulatingControl'.RegulatingControl:
Specifies a set of equipment that works together to control a power
system quantity such as voltage or flow.Specifies a set of
equipment that works together to control a power system quantity
such as voltage or flow.
CIM15.IEC61970.WiresPhaseModel.SwitchPhase'.SwitchPhase:
Single phase of a multi-phase switch when its attributes might be
different per phase.Single phase of a multi-phase switch when its
attributes might be different per phase.
CIM15.IEC61970.Wires.RatioTapChanger'.RatioTapChanger:
A tap changer that changes the voltage ratio impacting the voltage
magnitude but not the phase angle across the transformer.A tap
changer that changes the voltage ratio impacting the voltage
magnitude but not the phase angle across the transformer.
CIM15.IEC61970.Informative.InfWork.QualificationRequirement'.QualificationRequirement:
Certain skills are required and must be certified in order for a
person (typically a member of a crew) to be qualified to work on
types of equipment.Certain skills are required and must be
certified in order for a person (typically a member of a crew) to
be qualified to work on types of equipment.
CIM15.IEC61970.Protection.RecloseSequence'.RecloseSequence:
A reclose sequence (open and close) is defined for each possible
reclosure of a breaker.A reclose sequence (open and close) is
defined for each possible reclosure of a breaker.
CIM15.IEC61968.Metering.Register'.Register:
Display for quantity that is metered on an end device such as a
meter.Display for quantity that is metered on an end device such as
a meter.
CIM15.IEC61970.Informative.InfAssets.ReliabilityInfo'.ReliabilityInfo:
Information regarding the experienced and expected reliability of a
specific asset, type of asset, or asset model.Information regarding
the experienced and expected reliability of a specific asset, type
of asset, or asset model.
CIM15.IEC61970.SCADA.RemoteControl'.RemoteControl:
Remote controls are ouputs that are sent by the remote unit to
actuators in the process.Remote controls are ouputs that are sent
by the remote unit to actuators in the process.
CIM15.IEC61970.SCADA.RemoteSource'.RemoteSource:
Remote sources are state variables that are telemetered or
calculated within the remote unit.Remote sources are state
variables that are telemetered or calculated within the remote
unit.
CIM15.IEC61970.Core.ReportingGroup'.ReportingGroup:
A reporting group is used for various ad-hoc groupings used for
reporting.A reporting group is used for various ad-hoc groupings
used for reporting.
CIM15.IEC61970.Informative.InfCommon.Role'.Role:
Enumeration of potential roles that might be played by one object
relative to another.Enumeration of potential roles that might be
played by one object relative to another.
CIM15.IEC61970.Informative.InfCommon.DocPsrRole'.DocPsrRole:
Potential roles that might played by a document relative to a type
of PowerSystemResource.Potential roles that might played by a
document relative to a type of PowerSystemResource.
CIM15.IEC61970.Informative.InfCommon.ScheduledEvent'.ScheduledEvent:
Signifies an event to trigger one or more activities, such as
reading a meter, recalculating a bill, requesting work, when
generating units must be scheduled for maintenance, when a
transformer is scheduled to be refurbished, etc.Signifies an event
to trigger one or more activities, such as reading a meter,
recalculating a bill, requesting work, when generating units must
be scheduled for maintenance, when a transformer is scheduled to be
refurbished, etc.
CIM15.IEC61968.PaymentMetering.CashierShift'.CashierShift:
The operating shift for a cashier, during which he may transact
against the cashier shift, subject to vendor shift being open.The
operating shift for a cashier, during which he may transact against
the cashier shift, subject to vendor shift being open.
CIM15.IEC61968.PaymentMetering.Tender'.Tender:
Tender is what is 'offered' by the customer towards making a
payment and is often more than the required payment (hence the need
for 'change').
CIM15.IEC61968.Common.TimePoint'.TimePoint:
A point in time within a sequence of points in time relative to a
TimeSchedule.A point in time within a sequence of points in time
relative to a TimeSchedule.
CIM15.IEC61970.Topology.TopologicalNode'.TopologicalNode:
For a detailed substation model a TopologicalNode is a set of
connectivity nodes that, in the current network state, are
connected together through any type of closed switches, including
jumpers.
CIM15.IEC61968.PaymentMetering.Transactor'.Transactor:
The entity that ultimately executes the transaction and who is in
control of the process; typically this is embodied in secure
software running on a server that may employ secure hardware
encryption devices for secure transaction processing.The entity
that ultimately executes the transaction and who is in control of
the process; typically this is embodied in secure software running
on a server that may employ secure hardware encryption devices for
secure transaction processing.
CIM15.IEC61970.Wires.TransformerTankEnd'.TransformerTankEnd:
Transformer tank end represents an individual winding for
unbalanced models or for transformer tanks connected into a bank
(and bank is modelled with the PowerTransformer).Transformer tank
end represents an individual winding for unbalanced models or for
transformer tanks connected into a bank (and bank is modelled with
the PowerTransformer).
CIM15.IEC61968.AssetModels.TransformerTest'.TransformerTest:
Test result for transformer ends, such as short-circuit,
open-circuit (excitation) or no-load test.Test result for
transformer ends, such as short-circuit, open-circuit (excitation)
or no-load test.
CIM15.IEC61968.AssetModels.WireArrangement'.WireArrangement:
Identification, spacing and configuration of the wires of a
conductor, with reference to their type.Identification, spacing and
configuration of the wires of a conductor, with reference to their
type.
CIM15.IEC61970.Core.NameTypeAuthority'.NameTypeAuthority:
Authority responsible for creation and management of names of a
given type; typically an organization or an enterprise
system.Authority responsible for creation and management of names
of a given type; typically an organization or an enterprise system.
CIM15.IEC61970.Core.OperatingShare'.OperatingShare:
Specifies the contract relationship between a PowerSystemResource
and a contract participant.Specifies the contract relationship
between a PowerSystemResource and a contract participant.
CIM15.IEC61970.Wires.PhaseTapChangerTabular'.PhaseTapChangerTabular:
With PhaseTapChangerTabular it is possible to describe curve how
the the phase angle difference and reactance varies with the tap
step.With PhaseTapChangerTabular it is possible to describe curve
how the the phase angle difference and reactance varies with the
tap step.
CIM15.IEC61970.Meas.Quality61850'.Quality61850:
Quality flags in this class are as defined in IEC 61850, except for
estimatorReplaced, which has been included in this class for
convenience.Quality flags in this class are as defined in IEC
61850, except for estimatorReplaced, which has been included in
this class for convenience.
CIM15.IEC61970.Wires.RatioTapChangerTabular'.RatioTapChangerTabular:
With RatioTapChangerTabular it is possible to describe curve how
the voltage magnitude and reactance varies with the tap step.With
RatioTapChangerTabular it is possible to describe curve how the
voltage magnitude and reactance varies with the tap step.
CIM15.IEC61970.LoadModel.Season'.Season:
A specified time period of the year, e.g., Spring, Summer, Fall,
WinterA specified time period of the year, e.g., Spring, Summer,
Fall, Winter
CIM15.IEC61970.ControlArea.TieFlow'.TieFlow:
A flow specification in terms of location and direction for a
control area.A flow specification in terms of location and
direction for a control area.
CIM15.IEC61968.Common.UserAttribute'.UserAttribute:
Generic name-value pair class, with optional sequence number and
units for value; can be used to model parts of information exchange
when concrete types are not known in advance.Generic name-value
pair class, with optional sequence number and units for value; can
be used to model parts of information exchange when concrete types
are not known in advance.
CIM14.CDPSM.GIS_Connectivity.IEC61970.Wires.ACLineSegment'.ACLineSegment:
A wire or combination of wires, with consistent electrical
characteristics, building a single electrical system, used to carry
alternating current between points in the power system.If the
instance is an ACLineSegment, the r, x, r0 and x0 attibutes are
mandatory.
CIM14.CDPSM.GIS_Connectivity.IEC61970.Wires.Breaker'.Breaker:
A mechanical switching device capable of making, carrying, and
breaking currents under normal circuit conditions and also making,
carrying for a specified time, and breaking currents under
specified abnormal circuit conditions e.g.
CIM14.CPSM.Topology.Topology.TopologicalNode'.TopologicalNode:
For a detailed substation model a TopologicalNode is a set of
connectivity nodes that, in the current network state, are
connected together through any type of closed switches, including
jumpers.
CIM15.CDPSM.Asset.IEC61970.Wires.ACLineSegment'.ACLineSegment:
A wire or combination of wires, with consistent electrical
characteristics, building a single electrical system, used to carry
alternating current between points in the power system.
CIM15.CDPSM.Asset.IEC61968.Assets.AssetInfo'.AssetInfo:
Set of attributes of an asset, representing typical data-sheet
information of a physical device, that can be instantiated and
shared in different data exchange contexts: - as attributes of an
asset instance (installed or in stock) - as attributes of an asset
model (product by a manufacturer) - as attributes of a type asset
(generic type of an asset as used in designs/extension planning).
CIM15.IEC61970.Informative.InfCommon.Ratio'.Ratio:
Fraction specified explicitly with a numerator and denominator,
which can be used to calculate the quotient.Fraction specified
explicitly with a numerator and denominator, which can be used to
calculate the quotient.
CIM15.IEC61970.Wires.CompositeSwitchType:
An alphanumeric code that can be used as a reference to extar
information such as the description of the interlocking scheme if
any
CIM15.IEC61970.Domain.StringQuantity:
Quantity with string value (when it is not important whether it is
an integral or a floating point number) and associated unit
information.
CIM15.IEC61970.Domain.Capacitance:
A Farad, the typical unit, is the capacitance in which a charge of
1 coulomb produces 1 volt potential difference between its
terminals.