Package CIM15 :: Package IEC61970 :: Package Protection :: Module ProtectionEquipment' :: Class ProtectionEquipment

Class ProtectionEquipment

                           object --+                
                                    |                
                     Element'.Element --+            
                                        |            
  Core.IdentifiedObject'.IdentifiedObject --+        
                                            |        
Core.PowerSystemResource'.PowerSystemResource --+    
                                                |    
                        Core.Equipment'.Equipment --+
                                                    |
                                                   ProtectionEquipment

Known Subclasses:

An electrical device designed to respond to input conditions in a prescribed manner and after specified conditions are met to cause contact operation or similar abrupt change in associated electric control circuits, or simply to display the detected condition. Protection equipment are associated with conducting equipment and usually operate circuit breakers.An electrical device designed to respond to input conditions in a prescribed manner and after specified conditions are met to cause contact operation or similar abrupt change in associated electric control circuits, or simply to display the detected condition. Protection equipment are associated with conducting equipment and usually operate circuit breakers.

Instance Methods

[hide private]

__init__(self, highLimit=0.0, powerDirectionFlag=False, lowLimit=0.0, unitSymbol='N', relayDelayTime=0.0, unitMultiplier='M', ConductingEquipments=None, ProtectedSwitches=None, *args, **kw_args)
Initialises a new 'ProtectionEquipment' instance.

addConductingEquipments(self, *ConductingEquipments)

addProtectedSwitches(self, *ProtectedSwitches)

getConductingEquipments(self)
Protection equipment may be used to protect specific Conducting Equipment.

getProtectedSwitches(self)
Protected switches operated by this ProtectionEquipment.

removeConductingEquipments(self, *ConductingEquipments)

removeProtectedSwitches(self, *ProtectedSwitches)

setConductingEquipments(self, value)

setProtectedSwitches(self, value)

Inherited from Core.Equipment'.Equipment: addContingencyEquipment, addCustomerAgreements, getContingencyEquipment, getCustomerAgreements, getEquipmentContainer, removeContingencyEquipment, removeCustomerAgreements, setContingencyEquipment, setCustomerAgreements, setEquipmentContainer

Inherited from Core.PowerSystemResource'.PowerSystemResource: addAssets, addChangeItems, addDocumentRoles, addErpOrganisationRoles, addMeasurements, addNetworkDataSets, addOperatingShare, addPSREvent, addPsrLists, addReportingGroup, addSafetyDocuments, addScheduleSteps, getAssets, getChangeItems, getDocumentRoles, getErpOrganisationRoles, getLocation, getMeasurements, getNetworkDataSets, getOperatingShare, getOutageSchedule, getPSREvent, getPSRType, getPsrLists, getReportingGroup, getSafetyDocuments, getScheduleSteps, removeAssets, removeChangeItems, removeDocumentRoles, removeErpOrganisationRoles, removeMeasurements, removeNetworkDataSets, removeOperatingShare, removePSREvent, removePsrLists, removeReportingGroup, removeSafetyDocuments, removeScheduleSteps, setAssets, setChangeItems, setDocumentRoles, setErpOrganisationRoles, setLocation, setMeasurements, setNetworkDataSets, setOperatingShare, setOutageSchedule, setPSREvent, setPSRType, setPsrLists, setReportingGroup, setSafetyDocuments, setScheduleSteps

Inherited from Core.IdentifiedObject'.IdentifiedObject: addDiagramObjects, addNames, getDiagramObjects, getModelingAuthoritySet, getNames, removeDiagramObjects, removeNames, setDiagramObjects, setModelingAuthoritySet, setNames

Inherited from object: __delattr__, __format__, __getattribute__, __hash__, __new__, __reduce__, __reduce_ex__, __repr__, __setattr__, __sizeof__, __str__, __subclasshook__

Class Variables

[hide private]

_attr_types = {'highLimit': <type 'float'>, 'lowLimit': <type ...

_attrs = ['highLimit', 'powerDirectionFlag', 'lowLimit', 'unit...

_defaults = {'highLimit': 0.0, 'lowLimit': 0.0, 'powerDirectio...

_enums = {'unitMultiplier': 'UnitMultiplier', 'unitSymbol': 'U...

_many_refs = ['ConductingEquipments', 'ProtectedSwitches']

_refs = ['ConductingEquipments', 'ProtectedSwitches']

Properties

[hide private]

ConductingEquipments
Protection equipment may be used to protect specific Conducting Equipment.

ProtectedSwitches
Protected switches operated by this ProtectionEquipment.

Inherited from Core.Equipment'.Equipment: ContingencyEquipment, CustomerAgreements, EquipmentContainer

Inherited from Core.PowerSystemResource'.PowerSystemResource: Assets, ChangeItems, DocumentRoles, ErpOrganisationRoles, Location, Measurements, NetworkDataSets, OperatingShare, OutageSchedule, PSREvent, PSRType, PsrLists, ReportingGroup, SafetyDocuments, ScheduleSteps

Inherited from Core.IdentifiedObject'.IdentifiedObject: DiagramObjects, ModelingAuthoritySet, Names

Inherited from object: __class__

Method Details

[hide private]

init(self, highLimit=0.0, powerDirectionFlag=False, lowLimit=0.0, unitSymbol=`'N'`, relayDelayTime=0.0, unitMultiplier=`'M'`, ConductingEquipments=None, ProtectedSwitches=None, *args, **kw_args)
(Constructor)

Initialises a new 'ProtectionEquipment' instance.

Parameters:

highLimit - The maximum allowable value.
powerDirectionFlag - Direction same as positive active power flow value.
lowLimit - The minimum allowable value.
unitSymbol - The unit of measure of the value. Values are: "N", "A", "rad", "VAh", "Pa", "J", "h", "Hz", "VArh", "ohm", "H", "m3", "deg", "V", "oC", "F", "Wh", "s", "g", "min", "S", "none", "W", "VAr", "m2", "m", "VA"
relayDelayTime - The time delay from detection of abnormal conditions to relay operation.
unitMultiplier - The unit multiplier of the value. Values are: "M", "G", "d", "micro", "c", "p", "n", "T", "k", "m", "none"
ConductingEquipments - Protection equipment may be used to protect specific Conducting Equipment. Multiple equipment may be protected or monitored by multiple protection equipment.
ProtectedSwitches - Protected switches operated by this ProtectionEquipment.

Overrides: object.__init__

getConductingEquipments(self)

Protection equipment may be used to protect specific Conducting Equipment. Multiple equipment may be protected or monitored by multiple protection equipment.

Class Variable Details

[hide private]

_attr_types

Value:

{'highLimit': <type 'float'>,
 'lowLimit': <type 'float'>,
 'powerDirectionFlag': <type 'bool'>,
 'relayDelayTime': <type 'float'>,
 'unitMultiplier': <type 'str'>,
 'unitSymbol': <type 'str'>}

_attrs

Value:

['highLimit',
 'powerDirectionFlag',
 'lowLimit',
 'unitSymbol',
 'relayDelayTime',
 'unitMultiplier']

_defaults

Value:

{'highLimit': 0.0,
 'lowLimit': 0.0,
 'powerDirectionFlag': False,
 'relayDelayTime': 0.0,
 'unitMultiplier': 'M',
 'unitSymbol': 'N'}

_enums

Value:

{'unitMultiplier': 'UnitMultiplier', 'unitSymbol': 'UnitSymbol'}

Property Details

[hide private]

ConductingEquipments

Protection equipment may be used to protect specific Conducting Equipment. Multiple equipment may be protected or monitored by multiple protection equipment.

Get Method:: getConductingEquipments(self) - Protection equipment may be used to protect specific Conducting Equipment.
Set Method:: setConductingEquipments(self, value)

ProtectedSwitches

Protected switches operated by this ProtectionEquipment.

Get Method:: getProtectedSwitches(self) - Protected switches operated by this ProtectionEquipment.
Set Method:: setProtectedSwitches(self, value)

Class ProtectionEquipment

__init__(self, highLimit=0.0, powerDirectionFlag=False, lowLimit=0.0, unitSymbol='N', relayDelayTime=0.0, unitMultiplier='M', ConductingEquipments=None, ProtectedSwitches=None, *args, **kw_args) (Constructor)

getConductingEquipments(self)

_attr_types

_attrs

_defaults

_enums

ConductingEquipments

ProtectedSwitches

init(self, highLimit=0.0, powerDirectionFlag=False, lowLimit=0.0, unitSymbol=`'N'`, relayDelayTime=0.0, unitMultiplier=`'M'`, ConductingEquipments=None, ProtectedSwitches=None, *args, **kw_args)
(Constructor)